These new socket sets from Laser Tools are ideal when space is restricted and there is just not enough room to get a socket over the fastener. They both feature super-short sockets combined with the Laser Tools Go’thru design that lets you reach fixings that even conventional deep sockets cannot reach.

The ½in drive low-profile dual-drive socket set (part number 7103) features nineteen ultra-low-profile sockets that are hex-driven and fit in the low-profile 72-teeth ratchet. For example, a standard 17mm socket fitted to a standard-sized ratchet will typically measure a depth of around 60mm; in this set, the depth of the 17mm socket and ratchet together is just 35mm.

Additionally, the Go’thru design lets the socket and ratchet driver run down the length of the threaded bolt or screw to reach the fastener. Particularly suited for adjusting tappets, handbrake mechanisms or suspension bushes where access is needed to hold the threaded rod as the adjusting or securing nut is tightened. Socket sizes included: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 24mm, 27mm, 30mm and 32mm. The set also includes a quick-release ½in drive adaptor for standard sockets and two extension bars (125 and 250mm) with wobble-ends for increased versatility in difficult to access areas. A ½in drive universal joint is also included.

The low profile dual-drive socket set (part number 7068) features thirteen super-short 3/8in drive sockets, which feature the Go’thru design (8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 19mm, 21mm and 22mm). A quick-release 3/8in drive adaptor, two 3/8″ drive extension bars (75 and 150mm) plus a 3/8in drive universal joint are also included.

These sets are incredibly useful, especially on older cars that were not always designed with access in mind, and for classic cars, where often a variety of fastener types are used on one vehicle. Professional tools for the professional technician. For the 7103 set expect to pay around £211.85, and for the 7068 £147.34 (both prices include VAT). Remember to check for the best prices and special offers.

For more details go to www.lasertools.co.uk ENDS.