During hot weather many kit and classic car owners may have experienced hot starting problems associated with fuel vapour lock on cars equipped with carburettors.

DEI’s new Vapor (note US spelling when ‘Googling’) Block™ Fuel Line Sleeve provides an easy, sensible and low-cost solution that prevents rough idling and difficult starting caused by vapour lock.

The sleeve has been designed to greatly reduce heat in the fuel line thus keeping the fuel cooler and below evaporation point. The DEI Vapor Block Sleeve installs easily thanks to a split design and adhesive flap.

There is no need to disconnect the fuel line to install. Simply wrap Vapor Block around line, remove the adhesive release liner and press the adhesive back flap into place.

DEI Vapor Block Sleeve is made from glassfibre and polyester laminated onto an aluminium outer layer. It offers excellent long-lasting thermal protection and avoids expensive repairs or modifications.

DEI Vapor Block Sleeve is now available in three different sizes.

Choose from:
3/8in x 36in [9.398mm x 91.44cm] (part 010671) £13.48
5/8in x 36in [15.875mm x 91.44cm] (part 010669) £17.64
12in x 36in [25.4mm x 91.44cm] (part 010672) £10.14

Available in UK, Europe and Japan from Demon Tweeks [www.demon-tweeks.com].

In other areas, DEI Vapor Block Sleeve can be purchased online directly from www.designengineering.com ENDS.