Non-silicone based brake fluids absorb moisture over their service life and braking efficiency and safety is greatly reduced. As the level of moisture in the brake fluid increases, the boiling point gets lower, and the fluid cannot safely perform its vital function. Therefore the fluid should be tested, and the most efficient and accurate method of testing it is to actually measure its boiling point. The Laser Tools Brake Fluid Boiling Point Tester (part number 6802) is designed to measure the boiling point of brake fluid very quickly and with digital accuracy.

It works on all grades of brake fluid, the bright LCD screen shows clearly the temperature the brake fluid has boiled at, and recommends whether the brake fluid in the vehicle should be replaced or not.

As most vehicle manufacturers recommend that brake fluid is changed every two years, the tester is an easy to use but very accurate method of testing brake fluid efficiency. You can then offer your customer accurate information with a very clear recommendation on how to proceed in this safety critical area of vehicle maintenance.

And the accuracy and calibration of the device can be easily checked by testing the boiling point of clean water; if it boils at 100°C, then your tester is 100 per cent accurate!

This professional brake fluid tester is available now at a typical price of £417.58 inc VAT, but remember to check your local Laser Tools supplier for the best prices and special offers.

More details from www.lasertools.co.uk ENDS.