admin
This user hasn't shared any biographical information
Posts by admin
PRO LS COVER ALIGNMENT TOOL FOR GM LS FROM SUMMIT RACING
Dec 19th
Getting the crank seals in your Gen III or Gen IV LS engine’s front timing and rear main seal cover is critical to preventing oil leaks.
A set of Summit Racing Pro LS Cover Alignment Tools will prevent those leaks by perfectly aligning the seal openings when you install the covers. That makes it easier to install the seals, too.
You can find all of the latest Summit Racing Brand products in the New Products Section at SummitRacing.com ENDS.
AARDVARK SNIFF OUT A NEW MODEL
Dec 12th
Nice
Aardvark Racing Ltd (ARL) is excited to announce that they will be launching a new model to sit alongside the established GT-R early in 2020.
The new car features a stiffer, lighter chassis design that has been optimised using the very latest finite element analysis methods and software. The sleek new body has a smaller frontal area for less drag while the rear wing and front bodywork increases downforce over the GT-R.
The bodywork also features integrated alignment pegs for an easier build process and houses projector headlights. The new model has been designed to accept the Honda Fireblade CBR1000RR engine giving More >
WIDE TRACK 10in MINI WHEEL
Dec 12th
Mini Spares now produces its own wide-track 10in road wheel for classic Minis and kitcars that use this small diameter fitment.
The Mini Spares Minator wheel features a flat-fronted rim design and eight rounded spokes. In addition, it has a 55mm chrome centre cap with 40mm centre logo area (which is the same size as the current front and rear wing type badge logo).
The distance from hub face to the outer edge is 3.25in and the wheel uses standard pre-1984 round angle 88G322 nuts or chrome CN4 nuts (not included).
Order as WHL1001BLACKpriced from £61.20 inc VAT each.
For more details contact Mini More >
AVOID HEAT SOAK WITH DEI
Dec 12th
Both performance and factory fuel injectors can be at risk of vapour-lock due to hot fuel or heat soak resulting in a rough idle, slow starting, stalling or other potential serious engine problems.
DEI has solved the problem with its Fuel Injector Reflective Heat Covers that reflect direct and radiant heat away from the injectors. Cooler fuel injectors will perform more efficiently and offer a more consistent throttle response.
The covers are made from high-temperature rated glassfibre material bonded to a heat-reflective aluminised material. DEIs Fuel Injector Heat Covers can be used on most engine configurations that utilise factory or aftermarket fuel More >
THE HUB
Dec 12th
With over 25 years of experience supplying steering wheel and hub kits in the UK, B-G’s range of hub kits features over 800 vehicle applications from classic to modern. The latest application to be added to the range is for the Lotus Elise (Series 1).
B-G Hub Kits are produced in Italy from the finest cast aluminium materials and are dual-drilled to be compatible with various steering wheels featuring either a 6 x 70mm PCD pattern (such as MOMO, Sparco, OMP, Simoni, Mountney M-Range) or a 6 x 74mm PCD pattern (such as Nardi, Personal, Raid).
B-G Hub Kit BG8184 is a More >
CAP FOR YOUR TWINK
Dec 12th
Burton Power has announced that it can now supply new billet machined alloy caps for the classic Ford Lotus Twin Cam 8v 1558cc engine.
The cap can be ordered as part number FL854 and retails at £37.96 inc VAT.
It is suitable for: Ford Lotus Cortina Mk1 1963-1966 Ford Lotus Cortina Mk2 1967-1970 Ford Escort Twin Cam 1968-1970 Lotus Elan 1962-1974 Lotus Europa 1971-1975 Caterham Seven 1973–1974 and it also fits the Ford Cosworth BDA 16v engine: Ford Escort Mk1 RS1600 1970-1974 Ford Escort Mk2 RS1800 1975-1977
Available from Burton’s Performance Centre in Essex or by ordering from www.burtonpower.com or at the other end More >
INSULATION FOR CARBS FROM WEBCON
Dec 12th
Effective heat insulation is essential with any downdraft carburettor installation.
If heat is allowed to rise through the manifold and reach the carburettor, it is likely that heat-soak will occur, which will lead to poor hot starting.
Webcon has announced the introduction of its own range of carburettor heat insulators.
Superbly produced, using the latest laser cutting technology to ensure outstanding levels of accuracy, the new range is manufactured entirely in the UK and is available for the following models of Weber carburettor:
Ref Suits Weber Retail More >
TYRE SPINNING
Dec 12th
Static wheel balancing. The old fashioned way. Perhaps not recommended for super-wide modern wheels and tyres, but still, a valid method for the narrower wheels and tyres fitted to many kit and classic cars.
Gunson has just introduced this simple to use static wheel balancer (part number 77162) letting you quickly and easily balance your wheels in the home workshop or garage. Static balancing ensures the tyre is balanced around its circumference, even as it deforms with speed, temperature and pressure. This reduces vibrations at high speed and enhances tyre tread life. Particularly suited to crossply and bias-belted tyres.
The wheel to More >
ROCKETS ALL THE WAY FOR EXO
Dec 5th
A few changes to tell you about at Exo Sports Cars. Firstly, the company has moved from their Nottingham city centre base with their new location being just two minutes’ drive from the Tuxford exit on the A1 near Newark. Just north, in fact.
The new facility has much more parking available and will be much easier to find.
NEW HOME FOR EXO SPORTS CARS
They’ve also streamlined their model range of late now just concentrating on SVE Rocket Classic and SVE Rocket 2, while they also now only fit car engines, doing away with bike stuff.
The range of engines that they can More >
GIVE YOUR RETRO-LOOKING ENGINE A HERITAGE LIFT
Dec 5th
Among the exciting new products being finalised by Jenvey Dynamics to join their Heritage range is this IDF Heritage Throttle Body TDFS, which includes pre-built throttle body, position sensor, fuel rail injectors and looms.
This part is designed and completely manufactured in the company’s workshop in Shropshire. It boasts all of the many plus-points associated with individual throttle bodies, yet manages to marry these with the subtle, understated looks of a period IDF carburettor ensuring that if you are aiming for a certain look with your classic car or classic replica you can achieve it.
The Heritage Throttle Body is an entirely homogenous More >
