admin
This user hasn't shared any biographical information
Posts by admin
PROTECT STUFF
Jul 2nd
A really useful and very effective product we’ve been using in the workshop lately is Tectane PS697.
It’s very good at protecting chrome from tarnishing, especially in winter and it’s as easy as just spraying a light coating onto the surface and offers long-lasting protection from corrosion, oxidation and dirt.
After the wax has dried it leaves a sticky, water repellent film, which is all-but colourless and resists road-salt and is heat resistant to 100-degrees C.
Tectane products are available from a variety of outlets including Toolstation and Idealsealants.com with more information from www.siroflex.co.uk ENDS.
COVER YOUR TRUMPETS
Jul 2nd
Webcon has just launched their new Domed Screens for 45 DCOE / 44/48IDF and 48 DCO/SP /48 IDA carburettors.
These are simple mesh domes that are an ideal alternative to running with open trumpets, and offer a basic level of debris ingress protection. Domes supplied in pairs and are a push-fit into the air horns, and are able to be adjusted slightly with pliers to suit slight variations in air horn diameter.
For 45 DCOE/44/48IDF carburettors order as 9900804500 or for 48IDA/48DCO/SP carburettors order as 9900804800 with both variants priced at £41.39 inc VAT per set.
For further details contact Webcon UK on More >
MINI SPARES NEVER IDLE
Jul 2nd
Mini Spares can now supply an idler gear and roller bearing kit for the pre-A-plus 1275 engine.
This is a great way of repairing worn idler gear casings or converting to a quiet set of drop-gears for tuned road cars and kitcars running this engine.
The teeth are cut to pre-A-plus gear design, as per Cooper S and cost £199.42 inc VAT per set and wear order number C-22G943 with more details from www.minispares.com or 01707 607 700 ENDS.
EXTENDED LASER
Jul 2nd
This new extension bar set from Laser Tools (part number 6081) supplies ten essential tools for driving sockets, especially useful for the modern engine bay where space is at a premium and accessibility can be difficult.
As well as the four usefully sized, 3/8in drive extension bars (75mm, 150mm, 250mm and 460mm), are a sliding T-bar, universal joint, 5/16in and ¼in bit adaptors and a 3/8in drive to ¼in drive reducer. All manufactured from chrome vanadium for strength and a long, robust life. Also included is the innovative and functional aluminium quick swivel handle — the extension bar goes straight through More >
TURBO NUTTER
Jun 25th
Our mate Duncan Cowper is well-known for his on-track driving exploits over the years, most recently in a rather mad, yet beautifully built, Rush, now looking resplendent in its new colourscheme.
The car, with expert engine expertise from ex-F1, Mountune and Janspeed spannerman, Geoff ‘of the jumper’ Page, has recently undergone a bit of a rebuild. Some of this has revolved around the turbocharger.
Dunc enlisted the help of Turbo Dynamics, experts in their field with an enviable list of credits. The Christchurch, Dorset-based company uprated the compressor wheel for one of their far more efficient 76mm billet compressor wheel, with a More >
JEWEL FROM NORTHAMPTON
Jun 25th
Well-known for their tuning, preparation and rolling-road prowess, Northampton Motorsport, has just gone one better with their superb and unique, ‘Carb Injection’ kit, initially devised for the Jaguar XK engine (3.8- and 4.2-litre), seen here, although other options are planned.
Almost too good to cover up with a bonnet, the kit has been designed in-house and really is very, very clever, with hidden throttle position sensor and Bosch injectors. The ensemble has been tested to 6-bar.
The package improves drivability, control and sophistication of fuel injection, while retaining the classic look of carburettors and the kit includes, three Northampton Motorsport-designed DCOi injector More >
CLASSIC LINKAGE
Jun 25th
Burton Power is now stocking the latest twin cable linkage from Webcon for twin Weber DCOE carburettors and DCOE pattern throttle bodies. The linkage also fits DCO/SP applications.
The linkage kit is 100 per cent UK-made to Webcon’s exacting standards and gives the classic and kitcar enthusiast a superb quality, billet-machined classic linkage system that includes all of the required fixtures and fittings thus making it more complete than any similar product available on the market.
Order as WEBLP2500 at £99.95 inc VAT and replaces part numbers FSESTLK100 and FSETLK2W.
More from 0208 554 2281 or www.burtonpower.com ENDS.
NEW CRANK?
Jun 25th
Mini Spares has just announced their own crankshafts made from brand new forgings. The new cranks are based on the EN40B original items. They have large counter-balanced webs and bored holes for the big ends to reduce the reciprocating weight of the crankshaft.
It is not necessary for the customer to drill through the counterbalance webs. Forgings are known to be stronger than billets as the grain pattern follows the shape of the webs and bearings; this contrasts with the billet type cranks which are machined across the grain.
The Mini Spares forged crankshaft is supplied nitride and are designed for 1275cc More >
LASER GAUGE
Jun 25th
Keeping the recommended tyre pressure on our wheels provides better safety and efficiency on the road. This new tyre pressure gauge from Laser Tools (part number 6055) will make sure that your tyre pressures are set accurately.
Having properly inflated tyres means better fuel consumption, tyres don’t wear out as quickly and ensures your car handles as the manufacturer designed it to. The Laser tyre pressure gauge is cased in rubber for toughness and liquid filled for accuracy. The valve connector is angled and swivels for ease of access and the hose is a useful 550mm in length. Gauge diameter is More >
DRILLBIT CITY
Jun 25th
These new Cobalt drill bits offer high heat and abrasion resistance and are ideally suited to drilling hardened steel, titanium and stainless steel than normal HSS drill bits.
They come in a set of 19 drill bits in 1-10mm diameter in 0.5mm increments and come with a gold finish in standard DIN 338 and a hardness of 64/66HRC with a retail price of £21.48 inc VAT per set.
Alternatively individual specific sizes are available in packs of ten as follows:
SWE260 1mm – £2.52 SWE261 2mm – £2.83 SWE262 3mm – £3.50 SWE263 4mm – £5.42 SWE264 5mm – £8.26 SWE265 6mm – £11.04 SWE266 7mm – £13.58 SWE267 8mm – £15.97 SWE268 9mm – £19.51 SWE269 10mm – £23.52More More >
