News
HELLO SUNSHINE
Mar 25th
Solar power is continuously gaining momentum and popularity and this new solar-powered battery charger from Gunson (part no: 77170) is an effective way to charge and maintain 12-volt batteries. It prevents batteries from being damaged if they completely discharge. It will work in all daylight conditions and is fully weather resistant.
Modern cars draw a lot of power from their battery, powering systems such as clocks, alarms, immobilisers and trackers. When the vehicle is not being used regularly the alternator doesn’t get a chance to top the battery up. Returning from holiday to discover a flat battery is less than ideal. More >
ENJOY YOUR OWN SPACE
Mar 25th
Webcon has announced the addition of the Edelbrock 8715 carburettor spacer to its comprehensive range of Edelbrock parts.
The 8715 is a precision-made, ½in thick, aluminium spacer kit that is used to increase the length of the intake to increase throttle response in the low to mid rev range.
8715 is supplied as a kit complete with gasket, washers, nuts and longer mounting studs and priced at £58.15 inc VAT.
For further details contact Webcon UK on 01932 787 100 or visit www.webcon.co.uk ENDS.
MAXXIS SUCCESS
Mar 25th
Swedish automotive magazine, Vi Bilägare, recently undertook a test of eight 225/45 R17 summer tyres and confirmed the Maxxis Premitra 5 HP5 summer tyre as the overall winner.
The test, which was conducted in Mireval, France, comprised wet handling, braking and cornering grip, curved and straight aquaplaning, dry handling and braking, fuel consumption, noise, comfort and rolling resistance. According to Vi Bilägare: “It quickly became clear that Taiwanese Maxxis Premitra HP5 are here to be taken seriously” [translated].
The dry road driving test, comprised of the average lap time of three laps, revealed that the Maxxis Premitra 5 had the fastest lap More >
THE SHIELD
Mar 25th
If you work with engines then sooner or later, you’ll probably burn yourself on a hot exhaust and, when you do, it will spoil your day.
Heat protection specialist DEI has now introduced a couple of stainless steel heat shields to offer a bit more protection against accidental burns.
The shields are made from durable 304 stainless steel and preformed with a curved shape to fit most sizes of pipe. The shields feature two layers of stainless steel encapsulating a layer of high-temperature insulation, that has a direct temperature rating of up to 2000°F (approx. 1093°C).
Half inch (1.27cm) high standoffs provide an More >
NEAT SOLUTION
Mar 25th
When trial-fitting panels a handy and repeatable way of securing them is by way of Cleco fasteners. This new set from Pela Tools features ten Clecos to suit 2.5mm holes, ten to suit 3.2mm holes four x 12mm clamping pins and a set of decent pliers to fix them in place.
All you have to do is drill a hole in the plates to be fastened and then insert a Cleco in the hole and the plates will be held together with 10kg of pressure.
When finished or satisfied with the trial-fit you can remove the Cleco with the pliers. Easy as More >
THE MUSEUM. REINVENTED
Mar 18th
As regular readers will know, TKC Mag/totalkitcar have always been big supporters of Richard Usher and his Blyton Park circuit so we’ve naturally been following his new project the Great British Car Journey attraction with real interest.
Never one to be deterred, Richard has overcome illness, floods and the pandemic and has this week announced that he and his team will be opening their Derbyshire venue in late May after signing a lease on the former Wire Works site in Ambergate, Derbyshire (just off the A6 between Derby and Matlock). A brilliant venue.
Richard said: “Signing the lease puts us on track More >
NEW WAY OF DOING THINGS
Mar 18th
When it comes to car care it’s great to use quality microfibre towels and drying towels along with tyre applicator pads and wheel cleaning brushes and the like. An area where I often think could be improved upon is when it comes to cleaning your car’s interior.
There are some lovely potions and elixirs available to clean, condition and protect plastic trim but I have lost count of the times I’ve tried to clean an air-vent or get in tight to a switch on the dashboard or centre console only to be left a bit let-down because I just couldn’t reach More >
GIVE US A ‘WEV’!
Mar 18th
Watt Electric Vehicle Company (WEVC) claims that it will redefine premium electric sportscars with its first model: the classic-inspired Coupe.
Carving out an entirely new niche, the two-seater, rear-wheel drive, mid-motor-mounted WEVC Coupe combines retro looks with the very latest in a lightweight, EV architecture, creating an engaging, real-world sportscar, yet one that conforms to modern safety standards.
Under the skin is WEVC’s in-house developed EV platform, called PACES. Made from bonded aluminium, it features an integrated battery enclosure built into the primary chassis as opposed to a separate battery case, allowing the entire platform to be lightweight and very structurally efficient – More >
GETTING THE BAND BACK TOGETHER!
Mar 18th
New from our mate Dougal at Longstone Tyres are these lovely Michelin XZX 165HR15 White Wall tyres, which are absolutely ideal for a VW Beetle or a kitcar based on such a thing.
They are part of the Michelin Collection range at Longstone. Actually, that size was fitted to quite a few classic cars, too and are a radial replacement for 5.60-15 or 5.90-15 crossplies.
The tyre features a 28mm white band and have a speed rating of ‘S’ and are available now priced at £169.20 each or £648 for four or £802.80 for five.
More from www.longstonetyres.co.uk or 01302 714 072 ENDS.
More >
JUMPING BEANS
Mar 18th
Burton Power claims that this is the most efficient dry-sump system currently available. It is suitable for YB Cosworth (N/A & turbo) and SOHC Pinto engines from clubman level up to serious full race.
The kit includes a smooth cast aluminium sump pan with a sealing O-ring to the block face, mounting bosses for a crank sensor bracket, twin filtered scavenge pick-ups and an integral baffle assembly.
The sump also contains various external mounting points which makes it possible to use a custom-made cradle to mount the 4wd front differential whilst providing clearance for the driveshaft.
The pump mounts on the distributor side More >
