In performance cars fuel starvation can be an issue when high lateral-G forces in extreme cornering or vehicle angle conditions uncover the in-tank fuel pump or fuel pickup. This is problem is compounded if you use a factory fuel tank that is not baffled properly for the conditions.

FiTech’s HyperFuel Single Pump G-Surge Tank is an external unit that features one or two 340 LPH electric pumps fitted in a tank connected to your existing fuel system. Because the G-Surge tank gets a steady supply of fuel from your existing fuel system (and the fuel return line if using EFI), the More >

When a fastener is buried deep in the engine bay (or any other inaccessible area), and you just cannot get a screwdriver or hex key onto to it, try this innovative new 10-piece Low Profile Offset tool kit (part number 6709) from Laser Tools.

To offer maximum access in really confined spaces, each driver is flat steel with a 15° angled head; they are 15mm wide at the end coming down to just 10mm at the driver head. The depth of the driver bit is 8mm, which securely fits the fastener, whether hex or screw, and the 105mm length gives terrific More >

I’ve known Duncan Cowper for more years than I care to remember and the one-time DJ Sportscars employee and DAX Rush stalwart has had a succession of bonkers versions of that model over the years and thanks to his exploits must have been responsible for a good chunk of the 1200 or so sold since Jürgen Möhr’s design first came to the UK in 1991.

Dunc’s current DAX Rush with 500+bhp and a turbo from an old Benetton F1 car

Dunc has always been able to go very swiftly in his cars, be it sprinting, hillclimbs, or you name it really. His More >

The latest promotion from tool meisters, Sealey focuses on hand-tools the sort of stuff you need to finish garage or workshop tasks and kitcars, of course. It runs from now until December 31.

The promotion features a variety of their new and most popular products, with over 160 tools and sets included, with discounts up to 56 per cent over recommended retail price so you are sure to find some really useful additions to your tool collection.

Featured within this offer-packed promotion you will find Sealey’s New S01152 61-piece Screwdriver, Bit & Nut Driver Set, which is a further addition to this More >

When a fastener is buried in the engine bay (or any other inaccessible area), and you just cannot get a screwdriver or hex key onto to it, try this innovative new 10-piece Low Profile Offset tool kit (part number 6709) from Laser Tools.

To offer maximum access in really confined spaces, each driver is flat steel with a 15° angled head; they are 15mm wide at the end coming down to just 10mm at the driver head. The depth of the driver bit is 8mm, which securely fits the fastener, whether hex or screw, and the 105mm length gives terrific leverage.

The More >