DANGER OF CHOKING
Jan 14th
Fitting a twin-choke downdraft Weber carburettor has been a popular entry-level tuning upgrade for Ford engines for decades and one used by Ford themselves on their performance models.
The Weber 32/34DMTL Manifold for Ford CVH engines has been out of production for many years; however, now Webcon is delighted to announce it is to be available again and should be ready for delivery by the time you read this.
The Webcon manifold features threaded ports to accept the original Ford connectors and switches, a hotspot with increased surface area for better carb heating and mounting posts for the linkage mechanism. This makes More >
DRIP, DRIP, DRIP
Jan 14th
The B-G Fluid Spill/Drip Trays are the ideal solution to stopping unwanted fluid spills landing on the floor and are perfectly suited to garage, workshop, factory or motorsport pit/paddock environments. The low-profile design allows the B-G Fluid Spill/Drip Trays to be easily slid underneath machinery, vehicles or generators in order to catch any drips, thereby keeping the floor dry and safe. The trays can also be used for storing fluid drums, containers or bottles. The B-G Fluid Spill/Drip Trays are resistance to various fluids, including: most chemicals, fuel, oil and water as well as many more. B-G Fluid Spill/Drip Trays More >
PREPARE FOR WINTER WITH AUTOGLYM’S ULTIMATE SCREENWASH AND DE-ICER
Jan 14th
There are few more dispiriting feelings than stepping out of your house on a crisp, cold winters’ morning, only to find that your car has been almost entirely encased in ice and frost!
Freeing your car from winter’s grip can be both time-consuming and bone-chilling, neither of which are exactly ideal when you’re about to set off on a morning commute! If this sounds familiar then worry not, we at Autoglym have you very well covered with their ‘winter twins,’ Autoglym Ultimate Screenwash and De-Icer.
Autoglym Ultimate Screenwash
Dirty windscreens can be annoying at best, downright dangerous at worst, distracting you from the road ahead and even partially More >
BRAKE SERVICING MADE EASY
Jan 14th
New from Laser Tools, a comprehensive set of brake servicing tools in one handy and convenient kit (part number 7919). The set includes impact quality bit sockets, EU Registered Design punches (to remove dirty and corroded brake pins), a pound-through screwdriver and a selection of cleaning tools to ensure the brake pads can be replaced quickly, correctly and safely.
The tools have been specifically chosen for brake caliper and pad servicing and replacement. Included are a ¼in drive impact bit hex socket 9mm x 20mm, 3/8in drive impact bit hex sockets: 7mm and 8mm x 24mm; 9mm x 50mm; 7mm x More >
COOL HARNESSES
Jan 14th
In 1964, Takata Racing introduced its first full-harness seat belt system. Since then, Takata Racing harnesses have become standard equipment for all sorts of motorsports from drifting to Formula 1 and are big in the JDM (Japanese Domestic Market) tuner scene.
Summit Racing carries Takata Racing harnesses for full competition, trackday, and street use, including these:
RACE 3×2 Harnesses These FIA-approved six-point harnesses have 3in V-type shoulder straps, 2in lap belts, dual 2in anti-submarine belts, and an aluminium multi-point release camlock buckle. The shoulder belts have pull-down adjusters for quick fitment and are designed to wrap around a harness bar or rollbar. The lap More >
I ACTUALLY LIKE ICING
Jan 14th
If your VW Beetle’s Flat 4 engine is suffering from spluttering and flat spots it could be because of carburettor icing. This is particularly common on engines with a standard single Solex, as due to its positioning, it doesn’t benefit from the heat generated by the cylinder heads.
Heat is important to the combustion process as it assists with the atomising of the fuel and also prevents any water vapour in the air freezing.
VW engineered a number of ways to fix this issue including heat riser pipes, which draw warm air from the exhaust up alongside the manifold, and warm air More >
DON’T USE PLIERS ON HOSES. USE THESE INSTEAD!
Jan 7th
If you have ever been tempted to use a pair of grips or a screwdriver to remove a hose from a fixing, hopefully, you were able to do it before causing damage – to the hose, the surrounding components, or (more importantly) you. These new Hose Removal Pliers from Laser Tools (part number 7887) will ensure that you never run that risk.
These pliers have been designed to allow for the easy removal of vacuum and fuel hoses with diameters between 4 – 10mm. Their spring-loaded heavy-duty construction eases the removal of stubborn hoses, and the colour coded arms ensure you More >
TRUMPETS!
Jan 7th
Alexander Moulton’s rubber cone and trumpet suspension system was quite revolutionary when it appeared on the original Minis (although Moulton had designed a rubber cone and hydraulic system during his time at Alvis). The problem with revolutionary inventions is that once they cease production, they rapidly become hard to replace.
Thankfully, Mini Spares, true to its tradition of producing hard-to-find Mini parts, has produced its own version of the Rear Suspension Trumpet to fit the wider 3.7in cone spring base (earlier versions were 3.2in) and it is available in two lengths.
The 12.28in long version is available as part number 21A1684 and More >
PRETTY COLOURS. LOOK I’VE TOLD YOU BEFORE. NO KNOB JOKES!
Jan 7th
Mishimoto has added all-new colour options to their Weighted Shift Knob collection as well as new BMX gear-knobs.
They are designed for smooth and seamless gear change and constructed from steel for added weight and easier shift.
Weighing in at just 360gms the ergonomic shape allows for smooth shifting and comfortable hand position and they are available in multiple colour options – even glow-in-the-dark – to suit all tastes.
Purchase includes three insert sizes to fit various applications as follows – M8 x 1.25, M10 x 1.5, M12 x 1.25.
More from www.mishimoto.co.uk ENDS.
TITANIUM POWER
Jan 7th
New from Scottish car care maestros, Angelwax is Legacy Titanium Ceramic Coating, which unlike a lot of similar sealants is actually very easy to use. Some of these products can leave you needing a chisel to remove.
Legacy doesn’t require time to ‘cure’ using an infra-red lamp like some and once applied it will protect the surface of your vehicle from fallout and crud and makes maintenance much easier while leaving a super glossy finish.
A 30ml bottle (a little goes a very long way) costs £44.99 and is available via www.angelwax.co.uk ENDS.
