IT’S BEHIND YOU…
Nov 2nd
Burton Power can now offer a direct replacement for the original Cortina Mk1 and Mk2 interior mirror. Unlike the plastic original, the Burton version is manufactured from stainless steel.
This mirror is also suitable as a universal fitting mirror for various applications including kitcars.
It can be fitted as intended, hanging down from the ‘screen frame, but can also be fitted to the top of the dashboard standing upright.
The mirror includes a two-screw fitting with 42mm hole centres with the mirror dimensions 155mm x 63mm with an overall height of 90mm.
Available as part number MIRRORC12RV with a retail price of £19.40 inc More >
THAT’S ANOTHER FINE ‘MESH’!
Nov 2nd
Webcon has announced that its DCOE mesh filters are now back in production.
Designed to be used oil-free, the Webcon filters feature two layers of stainless mesh around a high-performance filter layer to offer superior levels of filtration while offering almost no restriction to airflow.
Fitting takes only a matter of seconds and the only maintenance required is periodic cleaning. They add no more than 20mm to the end of the air horn, so you can be assured of the very finest filtration in the tightest of spaces.
Webcon mesh filters are supplied in pairs as follows: 40 DCOE AFM4056 £34.95 plus VAT More >
…AND ON THE DRUMS – GUNSON!
Nov 2nd
Specialist car maintenance is easier when you have the right tools for the job. Working on drum brakes means often relying on a brake adjusting tool before they can be pulled free for maintenance.
This Brake Adjusting Wrench from Gunson (part number 77152) features a slim design that will fit most drum brakes, allowing you to adjust the clearance between the brake drum and the brake shoe.
The wrench fill fit both ¼in and 5/16in square brake adjusters, making it suitable for many older kitcars including Mini-based ones.
The tool is manufactured from hardened and tempered chrome-vanadium steel from strength and durability and More >
DAMP MX-5 (THINK ABOUT IT!)
Nov 2nd
GAZ has announced that it can now offer a special lightweight GAZ Gold Track/Road, all-aluminium bodied coil-over kit for the Mazda MX-5 Mk1/2.
The kit includes adjustable coil-overs on which the ride height can be adjusted through 60mm. The height adjusters have a coarse acme-form thread for ease of adjustment and to ensure that they remain in good order even after considerable service.
Damping rates are also variable by means of an adjuster knob on the damper bodies. The GAZ Gold range is designed primarily for out-and-out racing so each comes with a gas cell in the reservoir filled with a high More >
JAGUAR ON THE FLY(WHEEL)
Nov 2nd
Fidanza, Americaʼs leading performance flywheel specialists, have a direct replacement lightweight aluminium flywheel to improve the performance of six-cylinder Jaguar XJ6 models from 1972 to early 1987. This flywheel will also fit badge-engineered Daimler Sovereign models.
The Fidanza flywheel replaces the heavy standard item and improves the power-to-weight ratio making the engine more responsive and improves performance and acceleration. The product is made from high-quality machined 6061 T6 aluminium with a 1050 steel friction surface, CNC machined fastener holes and chamfers.
The friction surface of the flywheel is a replaceable steel plate, so when eventually the surface becomes worn it can be More >
BA THREAD SOCKET SET FROM LASER
Nov 2nd
If you are working with BA fasteners then turn to Laser Tools – this new BA socket and spanner set (part number 7132) covers the most commonly used sizes.
BA (British Association) screw thread sizes cover a range of small screw thread, originally being specified at the end of the nineteenth century as the British standard fastener for small electrical devices and scientific equipment. The design of the BA thread profile lends itself to low-torque applications. They are used for miniature instruments, clocks, optics, moving coil meters, conduit boxes, micro applications and modelling. BA fasteners can still be found on classic cars More >
JUMP TO IT
Nov 2nd
These amazingly small and lightweight portable lithium-ion power packs, act as a charger, torch and will jumpstart a vehicle with a flat battery.
The Jumpstart Micro 350 can be used as:
Jumpstart suitable for a car with a flat battery with a starting current of 200A and a peak current of 400A.
Lithium-ion power pack with 2x USB 5V ports and 12V/19V outlets for phones and computers and has a 1watt LED torch
Also included are a range of connectors including vehicle aux, mains charger and a 4-in-1 device adaptor for phones, tablets, etc.
This device can be used approximately twenty times on a single More >
ON THE UPRAMP WITH B&G RACING
Nov 2nd
These B-G Racing Mid-Rise Vehicle Ramps are ideal for multiple applications.
The ramps have 110mm of lift for quick under-body maintenance tasks. They also provide enough clearance to enable trolley jacks to safely access the lifting points of lowered vehicles. The gentle gradient makes them suitable for use on most lowered vehicles, kitcars, sportscars, rally cars and racecars.
These ramps are produced from a durable black polypropylene (PP) and have a combined weight loading capacity of 5000kg (11000lb) as a pair. They are priced at £83.99 inc VAT.
For more details visit 01268 764 411 or visit www.bg-racing.co.uk ENDS.
More >
MX-5 DAMPERS FROM GAZ AND DAMPERTECH
Oct 25th
GAZ has announced that it can now offer a special lightweight GAZ Gold Track/Road, all-aluminium bodied coil-lover kit for the Mazda MX-5 Mk1/2.
The kit includes adjustable coil-overs on which the ride height can be adjusted through 60mm. The height adjusters have a coarse acme-form thread for ease of adjustment and to ensure that they remain in good order even after considerable service.
Damping rates are also variable by means of an adjuster knob on the damper bodies. The GAZ Gold range is designed primarily for out-and-out racing so each comes with a gas cell in the reservoir filled with a high viscosity More >
STACKED HEELS
Oct 25th
These B-G Racing Mid-Rise Vehicle Ramps are ideal for multiple applications.
The ramps have 110mm of lift for quick under-body maintenance tasks. They also provide enough clearance to enable trolley jacks to safely access the lifting points of lowered vehicles. The gentle gradient makes them suitable for use on most lowered vehicles, kitcars, sportscars, rally cars and racecars.
These ramps are produced from a durable black polypropylene (PP) and have a combined weight loading capacity of 5000kg (11000lb) as a pair. They are priced at £83.99 inc VAT.
For more details visit 01268 764 411 or visit HYPERLINK “https://www.bg-racing.co.uk” www.bg-racing.co.uk ENDS.
More >
