BURTON CONVERSION
May 19th
Burton Power can now offer a kit to convert the Weber 32/36 DGV and DGAV series of carburettors from progressive opening to sequential operation.
Sequential operation is where both throttles open at the same time, and this is commonly used in motorsport where performance is more important than the economy benefits of a progressive carburettor set up.
This kit is essential for Oval Circuit, Stockrod and many other types of racing and is legal within the class rules with a new twin pump jet is included in the kit. It is manufactured in the UK and is a simple bolt-on conversion.
The package More >
DOT DOT DASH DASH
May 19th
Mini Spares is now stocking and recommending the use of Millers Racing Brake Fluid 300+ in classic racing and high performance braking systems where a non-mineral fluid is required and high braking temperatures are experienced.
300+ is a DOT 4 + formulation with an extra high dry boiling point – above 310°C in comparison to the 230C required for standard DOT 4 fluids.
It exceeds the requirements of SAE J1703, SAE J1704 and FMVSS 116 DOT 4 for use in competition braking systems. It is also perfect for use with all AP Lockheed genuine braking products (some other racing brake fluids are More >
I LIKE AN AERO!
May 19th
New from Wolfrace is Aero – a striking directional ‘turbine’ style design wheel with fifteen perfectly sculpted blades finished in either gloss black or titanium paint with polished spoke surface. Each spoke dips into the centre of the wheel creating a concave profile.
The Aero is available in four and five stud fitments in sizes 6.5x15in and 7x16in including 4×100, 4×108, 5×100, 5×108, 5×112, 5×114.3 and 5×120.
Five stud fitments are available in 8.5x18in and 8.5x20in.
Prices start at just £89.95 per wheel for the 15in size
Like many Wolfrace wheels, Aero has a superior weight-load compared to most aftermarket wheels meaning they are More >
ADD POWER WITH POWER ADDER
May 19th
Performance comes in packages big and small. Great examples of each are now available at Summit Racing – BluePrint Engines’ 383/445 HP Chevy Power Adder Crate Engine and HVH Super Sucker Carburettor Spacers.
This 383ci stroker small block Chevy engine is designed specifically for use with a power adder. It comes fully-assembled and ready for an induction system, ignition, and accessories.
New block 383 stroker high performance crate engine, with aluminum heads and roller cam.
The crate engine is rated at 445bhp and 463lb/ft torque, and has an 8.9:1 compression ratio that is perfect for a turbo or blower set-up.
Features include: Brand new More >
ANOTHER ONE BASED ON PORSCHE BOXSTER 986
May 12th
Joining Turismo UK’s Toyota MR2-based Avalanche GT package, which takes its design cues from a model by well-known Porsche tuner, Gemballa, comes the Evolution GT, which is based around Porsche Boxster 986 floorpan and mechanicals.
One of a growing number of manufacturers to recognise the opportunities presented by the entry-level Porsche.
This one takes its influences from the RUF CTR3, another famed Porsche 911 tuner and in addition to the 3.2-litre Boxster S power option, Turismo UK is also working on a GM LS3 V8 variant.
The Evolution GT differs from the Avalanche model by not being available in kit form, at least More >
CLASSIC KIT COMEBACK – SORT OF
May 12th
When I heard that Derek Hambly had acquired the Cox GTM Coupé (more lately available via Primo Designs) I just knew I’d heard that name before.
Then it dawned on me. Back in the day when I worked on Kit Cars & Specials magazine and we sponsored the fledgling Kit Car Challenge series (a proper motley crew of Wacky Racers) inaugurated in 1984 by the 750 Motor Club, Derek used to campaign a spritely little GTM with a feisty 1329cc A-Series engine and did quite well.
Anyway, these days, Derek (then based in Dover, now near Sevenoaks, Kent), a chartered mechanical engineer, More >
HAIRDRESSERS? NO, IT’S A CRIMPING TOOL, NOT A CURLING TOOL!
May 12th
This new crimping tool set from Laser Tools (part number 6532), provides a standard crimping tool plus an assortment of insulated crimp terminals and accessories all supplied in a convenient and sturdy plastic case.
The crimping tool includes six wire strippers (.75 – 6.0mm) and will crimp insulated and non-insulated terminals. Two sizes of crimp terminal are supplied, blue (2.5mm) and red (1.5mm) and comprise female spades, male spades, forks, eyes and joiners, 25 of each. Cable ties (50) and tie-wraps (20) are also included.
The generous assortment of terminals plus the sturdy crimping tool will be a very useful addition to More >
HERE’S ONE FOR MX-5-BASED KIT OWNERS’. SEE, I DIDN’T STOOP TO A ‘HORN’ JOKE!
May 12th
MX5parts has announced that it is once again stocking a range of aftermarket automotive horns from Stebel, the Italian manufacturer’s wares having proved justifiably popular when they were last offered by the MX5 specialist.
The extensive nature of the range carried by MX5parts means that there’s almost certain to be a Stebel horn suited to your particular car and/or application, whether or not you happen to own an example of the Mazda MX-5. This means that a wide selection of people can potentially experience the benefits of one of the best automotive horn systems currently on the market, one that embodies More >
ALL TOGETHER NOW… “ALL YOU NEED IS…”
May 12th
Summit Racing’s product people have been very busy scouring the earth for performance parts and accessories worthy of their name. They seem to have done a very good job.
You have your small block Chevy crate motor, fuel injection, induction system, ignition, headers, and other parts ready to bolt on. However, do you have everything you need to properly break in that engine? Relax – Summit Racing has gathered everything you’ll need in their new Crate Engine Startup Kit.
It includes:
- 5-litres (almost!) Joe Gibbs Driven 5W-30 break-in motor oil
- Chevrolet Dex-Cool coolant
- Fram HP4 oil filter
- Summit Racing oil filter adapter
- Summit Racing oil dipstick
- Summit Racing More >
ABSTER – A STUNNER
May 5th
Paul Goldsmith’s new Jakabi Abster made its debut at last weekend’s Stoneleigh show and was greeted with excellent response.
Although Paul has yet to set the final prices for the MGF-based body conversion, the automotive clay modeler reckons kits should start at around the £3500 mark.
He’s also supplying a stylish and subtle interior package that lifts the original but let’s face it, functional cockpit beautifully. He has already had enquiries from MGF owners looking to buy this particular element of his kit on its own.
I think the Mercedes-Benz sourced paint look good on the Abster too. You can read the EXCLUSIVE More >
