REGULATIONS ARE REGULATIONS!

Edelbrock has expanded its line of fuel pressure regulators for carburettor applications.

The regulators are machined from aircraft quality aluminium for those who demand the best. They include a fluoro-silicone diaphragm for extended life and high temperature protection.

The units feature an adjustable pressure range of 5-10psi and are available in 160- and 180-GPH. Select regulators include a 1/8in NPT gauge port and a boost reference fitting for blow- through or pressurised carb applications (even beyond 30psi boost).

They are designed to hold fuel system pressure for at least 20-minutes after pump shutdown and are compatible with all grades of petrol and even More >

NO MORE PLATE SPINNING

Now you can check your vehicle’s geometry without the need for ramps or jacks. All you need is a flat floor surface. Just drive straight on to the new B-G ultra-thin EZ Sweep Castor Slip Plates and take your measurements.

With 20 degrees of rotation, the EZ Sweep Castor Slip Plates can measure castor, camber and kingpin inclination angles. The secret to this unique product lies in the use of a PTFE-coated surface, which enables it to slip through the measuring arc without the need of messy grease or bulky bearings.

The plates have been robustly constructed with a stainless steel base More >

MARVELLOUS MILESTONE FOR GARDNER DOUGLAS SPORTS CARS

The National Kit Car Motor Show at Stoneleigh back in 1990, saw Andy Burrows introduce the Gardner Douglas brand to the kitcar market with their very their first model, the GD427 Mk3.

Very soon the GD was gaining much critical acclaim for its smooth, rattle-free road manners, roadholding and general performance. This was all largely due to their refreshing approach with the chassis underpinnings and body structure of their package.

The GD427 also proved itself as a dominant force in racing, with the stiffer, more agile car, so quick and capable through the corners.

However, it is the superlative engineering and road-going aspects More >

WOWZER!

Ultima Sports has announced the launch of an exciting new, updated model called the Ultima Evolution, which is available in both Coupe and Convertible forms and they replace the Ultima GTR and Ultima Can-Am, which are both now discontinued.

The Ultima Evolution retains the same timeless Le Mans Group C-inspired body shape as the GTR and Can-Am but is a vastly improved and modernised car in every sense. An Ultima spokesman said: “The model takes the Ultima brand to even greater levels of fit, finish, quality, safety, driver comfort, usability, practicality, handling finesse and performance. Many of the enhancements found on More >

NEW ERA FOR TIGER

Tiger Racing boss, Jim Dudley, has been in touch to tell me about his new ERA 30 Lotus 23 replica package.

The standard version is available fully built only and features an all-new Ford engine and Hewland Mk9 gearbox, a glorious thing but one with a price ticket of circa £42,000 inc VAT.

On the other hand, Jim’s new ‘lite’ version can be built, he estimates, for about the same price as the cost of that Hewland ‘box, which is about 10 grand. The bulk of the savings comes from the fact that you use an early nineties Audi 80 donor vehicle, More >

EXCITING NEW ARRIVAL

Omex Technology is one of Europe’s leading manufacturers of engine electronics for race series and niche vehicle manufacturers. For over 15-years Omex has also been developing engines and inlet systems to enable complete ‘turnkey’ package supply.

The Cheltenham-based company has just announced a massive expansion of their facilities that includes the release of their own in-house-designed, and manufactured, throttle bodies. The first product range suits DCOE/DHLA manifold compatible ITBs.

There are currently optimised inlet manifolds available for the Ford Duratec 2-litre and 2.3-litre (45mm bodies), Duratec 2.5-litre (48 or 50mm), Ford Zetec angled, Zetec straight shot (both 45mm) and Peugeot Mi16/GTi6 (45mm). More >

GOOD STUFF FOR SCOOBYS

Subarugears is an Australian company that manufactures a reversed ring and pinion gearset and associated components for the Subaru 5MT and 6MT transaxles. These components allow the AWD transaxle to be reversed, shortened and run in rear-engined cars such as VWs, Porsches and kitcars such as the Nova.

Subarugears ships direct to customers and commercial workshop around the globe and their range includes engine and transmission mounts as well as output flanges for cv joints and axles, making Subaru conversions a bolt-in option.

A range of adaptor plates and flywheels is also available, allowing other engines such as the GM LS range, More >

SERVICE THOSE WEBERS

Webcon has introduced a pump rod service kit for the Weber IDF range of carburettors, which are suitable for Weber 36/40/44/48 IDF, Italian and Spanish manufactured carburettors.

Part number CRK002 features only genuine Weber components and contains everything needed to replace the pump rod.

These genuine Spanish Weber parts are guaranteed to fit perfectly and will return your carburettors to their original levels of performance and priced at CRK002 is priced at £32.99 inc VAT.

More from Webcon directly and from their appointed dealers around the world with more information from 01932 787 100 or www.webcon.co.uk ENDS.

STINGER FROM MOMO UK

The new MOMO Sting is a sophisticated 15-spoke alloy wheel available for a wide range of vehicles. It’s available in four- or five-stud fitments and comes in a Hypersilver finish.

Sizes from 17in-20in are available and the MOMO Sting is Run-Flat and TPMS compatible in all sizes.

Prices from £150 inc VAT per wheel with more details from 01268 764 411 or visit www.momo-uk.co.uk ENDS.

THE POWER OF THREE

GKD Legend

Aeon GT3 Spyder

Fury

Three fine Kent-based manufacturers are pooling certain resources for kit sales, builds and kitcar show appearances although all three – Fury Sportscars, Aeon Sportscars and GKD Sportscars – remain independent.

First result of this link-up is that they’ll be sharing a stand at the forthcoming Stoneleigh show, the first appearance for Aeon, in particular, for several years. The company, based in Marden, are kept busy with their crop sprayers, although have always kept their kitcar products going and they also produce the chassis’ – rather handily – for Fury and GKD.

Fury Sportscars, run by the hugely talented kitcar More >

z library