SUPPORT IS AVAILABLE!
Apr 6th
Change the way your remove transmissions forever! Developed by a time-served mechanic for Laser Tools – when combined with a traditional transmission jack this patented Laser transmission support arm (part number 8579), simplifies gearbox removal and fitting by supporting the gearbox from above. The specially-shaped arm goes up the side of the gearbox and gives an attachment point to hang the support strap and chains supplied.
Because the gearbox is hanging from the support it is much easier to manoeuvre both in and out of position. The Laser transmission support arm turns a transmission jack from underneath support, into a much More >
ME OLD BAMBOO!
Apr 6th
Classic cars might be far more stylish than a modern run-about from a used car forecourt, but when it comes to cubby holes and pockets, they fall a little short of the mark.
Fortunately, help is at hand as SSP produce these great bamboo-style parcel shelves for beam-axle Beetles of all ages.
Influenced by the aftermarket accessories of old, this full-width storage surface compliments your classic interior charm and is perfect for sunglasses, mobile phones, CDs, Sat Nav and more.
Priced at £101.95 you can find them on HeritagePartsCentre.com by searching for part number 111-857-110/A you will be pleased to know they qualify for More >
ANOTHER TRIUMPH FROM WEBCON
Apr 6th
Webcon has announced the release of its long-awaited manifold and linkage set to allow the fitment of three Weber 40DCOE carburettors to the Triumph GT6 engine, which features in plenty of kitcars, of course.
The new kit features stepped manifolds to clear the sloping bonnet on the GT6. The new Webcon manifolds are designed, cast and manufactured in the UK to Webcon’s exacting quality standards. The set also includes a Webcon marine-grade stainless rod linkage system to ensure a smooth, accurate set-up and operational longevity.
The inlet manifold set and linkage can be ordered as part number MW0091 at £624.12 inc VAT.
Alternatively, More >
WHAT A RATCHET!
Apr 6th
Here’s one for our North American readers from Summit Racing. Zyclop Speed Ratchets are now available at Summit Racing.
Loosen and tighten stubborn nuts and bolts fast and efficiently with Wera Tool Zyclop Speed Ratchets. The ratchet heads swivel freely and can be locked in any position using the slide switch on both sides.
The T-handle drivers provide plenty of hand space even in very narrow and difficult-to-reach areas.
Other features include: • Available in 1/4in, 3/8in and 1/2in drive • 0°, 15°, and 90° positions guarantee safe working without the ratchet head slipping • In the 0°position, the ratchet can be used like More >
SUPERSPEED (CONVERSIONS) LTD
Apr 6th
STEVE HOLE tells the story of SUPERSPEED (CONVERSIONS) LTD
Another of the well-known sixties tuning companies was Ley Street, Ilford-based Superspeed (Conversions).
The men behind the company were brothers, John and Mike Young and their operation was part of and located next to, Ford dealer, Youngs of Ilford founded by their father, Mike Young senior.
They rose to prominence with their racing activities when John and Mike took their first steps in motorsport in their maroon-hued (actually a BMC colour called Crimson Lake) Fords.
John began his career in the British Saloon Car Championship (then running to Group 2 regulations) in 1962 in an More >
ANOTHER BEAUTY FROM MST CARS
Mar 30th
Not content with producing not one but two glorious Ford Escort pastiches, MST Cars has announced their next model a limited edition run of Group B-spec Metro 6R4.
These will use brand-new parts, they’ll be road-legal, with a mid-mounted V6 engine, four-wheel drive, sequential gearbox and an all-new carbon-fibre bodyshell produced in Wales in association with Innovate Composites.
No other details at the moment but we’ll bring you more news on this when we get it.
In the meantime, visit www.mst-cars.com ENDS.
POWERTRAINS FROM SWINDON POWERTRAINS!
Mar 30th
New universal vehicle battery pack from Swindon Powertrain High Energy Density (HED) gives a one-size-fits-all solution to vehicle builders and converters and does away with the need to use reconditioned packs, although depending on where they come from there’s nothing wrong with them.
I hate the term ‘plug and play’ but these HED packs have been designed to be a simple installation. Two versions are available – 30kWh or 60kWh the water-cooled packs come with a battery management system (BMS) and manual service disconnect.
They are suitable to be paired with a variety of electric motors and also Swindon’s own HPD range More >
WEBER CONVERSION FOR CVH
Mar 30th
Webcon has announced the relaunch of the Weber Twin Choke Conversion Kit for the Ford CVH 1.6-litre engine.
This popular engine is used in many kitcars. With many of the original carburettors approaching the end of their useful life, a Weber 32/34 DMTL manual choke carburettor conversion will breathe new life into these performance cars.
The Weber Twin Choke Conversion Kit can be ordered as part number PFO103 and includes a new Webcon manifold, a Weber 32/34 DMTL carburettor jetted for the 1.6-litre CVH engine, an air filter and an OEM air box adaptor, as well as a new choke cable.
The kit More >
ON THE SPOT
Mar 30th
This new spot weld cutter kit from Laser Tools (part number 8543) combines a high-quality 8mm HSS twist drill together with a 70mm extender and is designed to drill out or cut through spot-welds allowing for the weld to be broken and the welded panels taken apart.
The flat profile of the drill cutting face produces a burr-free hole leaving the underlying panel undamaged. The titanium nitride (TiN) coating on the spot-weld drill results in a sharp cut plus improved service life. Use on alloy and hardened steel where more heat may be generated.
Spot welds hard to access? The extender offers More >
UPLIFTING
Mar 30th
Draper Tools has given its workshop equipment category a huge lift (pun fully intended!) by introducing no fewer than eleven new trolley jacks with a lift capacity of 2, 2.25, 3 and 4 Tonnes. This extensive range is loaded with high-quality safety and functionality features and offers something for every garage.
The new trolley jacks are available in different colours and styles. The heavy-duty chassis are all low profile, the lowest needing just 75mm clearance, making them well-suited for use on sports and custom vehicles with reduced clearance heights. They are also easy to manoeuvre; all fitted with rear swivelling castors.
Other beneficial features More >
